Saltar al contenido Saltar a navegación Saltar al pie de página
VEHÍCULOS TODOTERRENO POLARIS

CENTRO DE AYUDA

6/29/2021
Playing Music with Model Year 2019 and Newer Ride Command

There are five audio sources supported by the RIDE COMMAND display: AM/FM radio, weather radio, USB audio and Bluetooth®.  Follow the steps below and note the compatibility requirements to play music on your model year 2019 or newer Polaris Off-Road Vehicle equipped with a RIDE COMMAND display. 

Note: When a headset is connected to the RIDE COMMAND display, the user has the option to toggle between the speaker and the headset for all audio sources. The switch is pictured below. 

Audio toggle

Press the Music button to access the audio screen.

Ride Command music button

To select an audio source, tap the source selector button in the top-left corner of the audio screen. You can also hit the hard music button to reach the audio select screen. 

Ride Command audio source select

This will present all audio source options, allowing you to choose your desired source. 

Audio options

AM/FM Radio
To access the AM/FM radio, press the source selector button in the top-left corner of the screen. Select AM or FM. 

Radio screen

Once selected, the center of the screen will display information for the station that is playing, including: 

  • Frequency
  • Buttons to tune up/down (0.2 MHz for FM, 10 KHz for AM)
  • Scan buttons to skip forward or backward by available stations
  • Scan button
  • Station name (if available)
  • Artist name (if available)
  • Song name (if available)
  • Audio settings (gear) icon
  • Signal strength

Along the bottom of the screen are radio presets that can be assigned to your favorite stations. To save a preset, tune to the desired frequency and tap and hold the HOLD TO SET button. 

 Radio Tuner Region FM, MHz AM, KHz
 North America 0.2  10
 South America 0.1 10
 Europe 0.1 9
 Europe 50KHz 0.1 9
 Japan 0.1 9
 Taiwan 0.2 9
 Australia 0.2 9

Weather Radio
To access the weather band radio, press the source selector button in the top-left corner of the screen. Select WEATHER RADIO. 

Weather Radio

Once selected, the center of the screen will display information for the station that is playing, including: 

  • Frequency
  • Station number
  • Audio settings (gear) icon
  • Signal strength

Switch stations by selecting the desired weather station on the bottom of the screen. Available stations vary by geographic location. 

USB Music Playback
To access your USB audio, press the source selector button in the top-left corner of the screen. Select USB/IPOD. Note: Playing music through the USB port offers the most playback information and options. 

Ride Command USB audio

Once selected, the center of the screen will display information for the song that is playing, including: 

  • Song title
  • Artist 
  • Album name
  • Album artwork (if available)
  • Song progress bar (includes current location and song length)
  • Audio settings icon
  • Playback controls
  • Repeat (if available)
  • Shuffle (if available) 
  • "Up Next" panel (if available)  

Note: USB music playback requires a USB 2.0 or 3.0 that is exFAT or FAT32 formatted. Audio file types must be in the .mp3 or .wav formats. 

Playback Controls for USB Music
The playback controls available on your RIDE COMMAND display include the following: 

  • Previous song
  • Play/pause
  • Next song
  • More menu

Repeat: There are three repeat options that can be applied to the music you are playing: don't repeat, repeat album/playlist or repeat song. When "1" appears next to the repeat icon, the song will replay. 

Up Next: Tapping UP NEXT on the screen will reveal the play queue in a pop-up window. 

Up Next

The song currently playing will be highlighted.

Up next pop-up

The anchored bottom bar displays remaining play time, the current song's position in the list and the repeat/shuffle controls. A user can remove the song from the queue by tapping the X button. Note: If the last song from the queue is replaying and repeat is OFF, the message "Playing last song" will be displayed as UP NEXT. 

More Menu: All available music categories found on the connected USB flash drive will appear under the More menu.

More menu

In the More menu, music is categorized by artist, album and song. 

More Menu categories 

1. Artists

  • Album titles are accompanied by cover art on flash drives that are loaded with album metadata. 
  • Tapping PLAY ALL will play all songs by the selected artist and immediately close the browse panel. 
  • Tapping SHUFFLE will shuffle and play all songs by the selected artist and immediately close the browse panel. 
  • Tapping the three dots "•••" will reveal two options to add all songs by an artist to the play queue. PLAY NEXT will add the songs next in the queue, and PLAY LAST will add the songs to the end of the play queue, as shown below. 

2. Artists > Albums

  • All album titles are accompanied by cover art on flash drives that are loaded with album metadata. 
  • Tapping PLAY ALL will play all songs on the selected album and immediately closes the browse panel. 
  • Tapping on SHUFFLE will shuffle and play all songs on the selected album and immediately closes the browse panel. 
  • Tapping the three dots "•••" will reveal two options to add all songs from the album to the play queue. PLAY NEXT will add the songs next in the queue, and PLAY LAST will add the songs to the end of the play queue. 

Play Next and Play Last

3. Artists > Albums > Songs

  • Tapping a song title will immediately begin playing it, and all subsequent songs in the album will be queued to play next. 
  • The song currently playing will be indicated by an animated EQ (speaker) graphic.
  • Tapping the three dots "•••" will reveal two options to add the selected song to the play queue. PLAY NEXT will add the songs next in the queue and PLAY LAST will add the songs to the end of the play queue. 

Bluetooth® Music
When no phone is connected, the Bluetooth® music screen will display a list of paired devices and the option to add a new device. To pair a Bluetooth® device to your RIDE COMMAND display, refer to Connecting Bluetooth® Devices to 2019 and Newer RIDE COMMAND Displays for step-by-step instructions.

To access Bluetooth® music, press the source selector button in the top-left corner of the screen. Select BLUETOOTH®. 

Bluetooth audio screen

Once selected, the center of the screen will display information for the song that is playing, including: 

  • Source device name
  • Song title
  • Artist
  • Album
  • Song progress bar (includes current location and track length)
  • Playback controls

If no sound is available after you begin streaming, check the volume on the Bluetooth® (source) device. Turn the volume up to enable the music to play.  

Playback Controls for Bluetooth® Music
Note: Some playback controls are unavailable when playing music from a streaming service. The playback controls for Bluetooth® music include: 

  • Previous song
  • Play/pause
  • Next song
  • More menu (if available) 

Disabling Audio
To turn the audio off, press and hold the volume down button until the display is muted. 

Bluetooth® is a registered trademark of Bluetooth Sig, Inc.
iPod® is a registered trademark of Apple Inc.

Palabra (s) clave ride , command , playback , usb , music , bluetooth , radio , audio , orv , sxs ,