Polaris GENERAL models can be equipped with Prospector Pro Tracks for all-terrain traction in winter weather. Listed below are the parts that make up the mounts and track kits for GENERAL vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount or track kit.
To order a replacement part for any aspect of your track system, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer.
To ensure a mount or tracks kit is compatible with your GENERAL, visit the Accessories section of the GENERAL website and use the fitment tool at the top of the page.
MOUNTS
Prospector Pro Track Mount (Part Number 2880649)
The following tables and diagrams list the parts included in the kits. Identification numbers correspond to the diagrams above each table. For more information, view the installation instructions. To order a part or kit, see your Polaris Dealer.
Front anchor bracket:
| Item | Description | Quantity | Part Number |
| 1 | Front Bracket Kit | 1 | 2205703 |
| 2 | Anti-Rotation Front Anchor Bracket | 2 | — |
| 3 | Front Bracket Cover | 2 | — |
| 4 | Hex Bolt-HCS, M10-1.5 x 55, 8.8, ZP, DIN931 | 4 | — |
| 5 | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 4 | — |
Rear anchor bracket:
| Item | Description | Quantity | Part Number |
| 6A | Rear Bracket Kit | 1 | 2205706 |
| 7A | Rear Left Anchor Bracket | 1 | — |
| 8A | Rear Right Anchor Bracket | 1 | — |
| 9A | Hex Bolt-HCS, M10-1.5 x 180, 8.8, ZP, DIN931 | 2 | — |
| 10A | Nylon Nut-FNN, M10-1.5, 8, ZP, DIN6926 | 2 | — |
| Item | Description | Quantity |
| 6B | Rear Bracket Kit | 1 |
| 7B | Rear Left Anchor Bracket | 1 |
| 8B | Rear Right Anchor Bracket | 1 |
| 9B | Hex Bolt-HCS, M12-1.75 x 180, 8.8, ZP, DIN931 | 2 |
| 10B | Nylon Nut-FNN, M12-1.75, 8, ZP, DIN6926 | 2 |
Steering limiter assembly:
| Item | Description | Quantity | Part Number |
| 11 | Steering Limiter Cable Assembly | 1 | 2205456 |
| 12 | Steering Limiter Mounting Disk | 2 | — |
| 13 | Steering Limiter Cable | 2 | — |
| 14 | Hex Bolt-HCS, M10-1.5 x 60, 8.8, ZP, DIN931 | 2 | — |
| 15 | Hex Bolt-HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | — |
| 16 | Step Spacer | 2 | — |
| 17 | Washer-W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 2 | — |
| 18 | Nylon Nut-NN, M10-1.5, ZP, 8, DIN982 | 2 | — |
| 19 | Support Plate | 2 | — |
Wheel lug nut:
| Item | Description | Quantity | Part Number |
| 20 | Wheel Lug Nut-LN, M12-1.5 x 14, 8, ZP | 16 | 2205458 |
GENERAL XP Track Mount (Part Number 2885117)
TRACKS
Prospector Pro Tracks (Part Number 2880758)
The following tables and diagrams list the parts included in the kits. Identification numbers and letters correspond to the diagrams above each table. The User Manual, which is universal for multiple models, includes installation instructions, adjustment procedures, break-in information, maintenance tips, torque specifications and troubleshooting solutions. To order a part or kit, see your Polaris Dealer.
Front left frame kit:
| Item | Description | Quantity | Part Number |
| A | Kit-Frame, Camoplast®, FL, UTV | 1 | — |
| 1 | LH Front Frame - UTV | 1 | — |
| 2 | Tensioner-UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8-1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker - Warning | 1 | — |
| 17 | Sticker - POLARIS UTV | 1 | — |
| 18 | Track Guide Front - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV MY 15 | 1 | 2205871 |
Front right frame kit:
| Item | Description | Quantity | Part Number |
| B | Kit-Frame, Camoplast®, FR, UTV | 1 | — |
| 1 | RH Front Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9 ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5 ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker- Polaris UTV | 1 | — |
| 18 | Track Guide Front | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
Rear left frame kit:
| Item | Description | Quantity | Part Number |
| C | Kit-Frame, Camoplast®, RL, UTV | 1 | — |
| 1 | LH Rear Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9 ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8- 1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker - Polaris UTV | 1 | — |
| 18 | Track Guide Rear - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
Rear right frame kit:
| Item | Description | Quantity | Part Number |
| D | Kit-Frame, Camoplast®, RR, UTV | 1 | — |
| 1 | RH Rear Frame - UTV | 1 | — |
| 2 | Tensioner - UTV | 1 | — |
| 3 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 4 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 5 | Steel Cap Nut | 1 | — |
| 6 | Hub Cap Polaris Assembly | 1 | — |
| 7 | HSBS, M6 - 1 x 10, 10.9, ZP | 1 | — |
| 8 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 9 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 10 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 13 | FNN, M8-1.25, 8, ZP, DIN6926 | 1 | — |
| 14 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 15 | Sticker-Alignment | 1 | — |
| 16 | Sticker-Warning | 1 | — |
| 17 | Sticker - Polaris UTV | 1 | — |
| 18 | Track Guide Rear - UTV | 1 | — |
| 19 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 20 | Kit-Bearing, Camoplast®, UTV | 1 | 2205871 |
18-tooth sprocket kit:
| Item | Description | Quantity | Part Number |
| E | Kit-Sprocket, Camoplast®, 18 Tooth | 1 | 2205433 |
| 1 | Sprocket-Camoplast® XP, 18 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
20-tooth sprocket kit:
| Item | Description | Quantity | Part Number |
| F | Kit-Sprocket, Camoplast®, 20 Tooth | 1 | 2205432 |
| 1 | Sprocket-Camoplast®XP, 20 Tooth | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
32 mm hub kit:
| Item | Description | Quantity | Part Number |
| G | Kit-Hub, Camoplast®, 32 mm | 1 | 2205870 |
| 1 | Hub-Camoplast® XP HD 32 mm Assembly | 1 | — |
| 2 | HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 | 4 | — |
| 3 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
Mid wheel kit:
| Item | Description | Quantity | Part Number |
| H | Kit-Wheel, Camoplast®, Mid, UTV | 1 | 2205127 |
| 1 | HD Wheel Assembly - 132 mm x 50 mm | 1 | — |
| 2 | Wheel Cap | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
Idler wheel kit:
| Item | Description | Quantity | Part Number |
| i | Kit-Wheel, Camoplast®, Idler, UTV | 1 | 2205447 |
| 1 | Wheel Assembly | 1 | — |
| 2 | Wheel Cap | 1 | — |
| 3 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 1 | — |
Outer rocker kit:
| Item | Description | Quantity | Part Number |
| J | Kit-Rocker, Camoplast®, Outer, UTV | 1 | 2205446 |
| 1 | UTV Stabilizer Assembly Male | 1 | — |
| 2 | HD Wheel Assembly - 132 mm x 50 mm | 2 | — |
| 3 | Wheel Cap | 2 | — |
| 4 | HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 | 2 | — |
| 5 | Urethane Cone, Stabilizer | 1 | — |
Inner rocker kit:
| Item | Description | Quantity | Part Number |
| K | Kit-Rocker, Camoplast®, Inner, UTV | 1 | 2205126 |
| 1 | UTV Stabilizer Female Assembly | 1 | — |
| 2 | Dust Cap, Stabilizer | 1 | — |
| 3 | HCS, M10 - 1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 4 | Tandem T Bushing | 1 | — |
| 5 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 6 | Urethane Cone, Stabilizer | 1 | — |
| 7 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
Bearing kit:
| Item | Description | Quantity | Part Number |
| L | Kit-Bearings, Camoplast®, UTV | 1 | 2205871 |
| 1 | Internal Spacer | 1 | — |
| 2 | Bearing - 6007 | 2 | — |
| 3 | Bearing - 6908 | 1 | — |
| 4 | Shaft Seal - 50 x 62 x 10 TC | 1 | — |
Track adjuster/tensioner kit:
| Item | Description | Quantity | Part Number |
| M | Kit-Track Adjuster, Camoplast®, UTV | 1 | 2205445 |
| 1 | Tensioner - UTV | 1 | — |
| 2 | 2 Lips Cap, 1-3/4-inch, OD Tube | 1 | — |
| 3 | Cap Nut | 1 | — |
| 4 | HFCS, M8 - 1.25 x 70, 10.9, ZP, IFI536 | 1 | — |
| 5 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 6 | Tensioner Bushing | 1 | — |
| 7 | FNN, M8 - 1.25, 8, ZP, DIN6926 | 1 | — |
| 8 | Tensioner Rod - Hex Nut Assembly | 1 | — |
| 9 | Sticker-Alignment | 1 | — |
Front track guide kit:
| Item | Description | Quantity | Part Number |
| N | Kit-Hyfax, Camoplast®, Front, UTV | 1 | 2205443 |
| 1 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Front | 1 | — |
Rear track guide kit:
| Item | Description | Quantity | Part Number |
| O | Kit-Hyfax, Camoplast®, Rear, UTV | 1 | 2205444 |
| 1 | SDSQWS, #12 - 24 x 1.5, ZP | 7 | — |
| 2 | Track Guide Rear | 1 | — |
Anti-rotation - front (stabilizing) arm kit:
| Item | Description | Quantity | Part Number |
| P | Kit - Anti-Rotation, FRT, UTV | 1 | 2205436 |
| 1 | Short Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 2 | — |
| 6 | W, 374 x 13 x 3, ZP, DIN9021 | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 8 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 9 | Stabilizing Rod Spring | 1 | — |
| 10 | Rubber Damper | 1 | — |
Anti-rotation - rear (stabilizing) arm kit:
| Item | Description | Quantity | Part Number |
| Q | Kit - Anti-Rotation, Rear, UTV | 1 | 2205437 |
| 1 | Long Anti-Rotation Tubing Weldment | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 3 | HFSCS, M12-1.75 x 50, 8.8, ZP, DIN6921 | 1 | — |
| 4 | X-Long Rod End | 1 | — |
| 5 | Rod End Spacer | 1 | — |
| 6 | Spacer Anti-Rotation | 1 | — |
| 7 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 8 | W, 374 x 13 x 3, ZP, DIN9021 | 1 | — |
| 9 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
| 10 | Compression Spring, Long - 480 lbs/in | 1 | — |
| 11 | Rubber Damper | 2 | — |
Hardware kit:
| Item | Description | Quantity | Part Number |
| R | Kit-Hardware, Camoplast®, UTV | 1 | 2205128 |
| 1 | Back Plate | 1 | — |
| 2 | Steel Cap Nut | 1 | — |
| 3 | HSBS, M6-1 x 10, 10.9, ZP | 1 | — |
| 4 | HCSW, M10-1.5 x 25, 8.8, ZP, TL, DIN933 | 8 | — |
| 5 | HCS, M10-1.5 x 45, 10.9, ZP, TL, DIN931 | 1 | — |
| 6 | HFCS, M8-1.25 x 70, 10.9, ZP, TL, IFI536 | 1 | — |
| 7 | HFSCS, M10-1.5 x 30, 10.9, ZP, DIN6921 | 6 | — |
| 8 | CP, 1/8, 1-3/4, ZP | 1 | — |
| 9 | SDSQWS, #12-24 x 1.5, ZP | 7 | — |
| 10 | Tandem T Bushing | 1 | — |
| 11 | Tensioner Bushing | 1 | — |
| 12 | W, 7/16 x 1.0 x 0.072, 8 ZP, USS | 3 | — |
| 13 | W, 9.9 x 6 x 0.9, AL | 1 | — |
| 14 | FNN, M8-1.25, 8 ZP, DIN6926 | 1 | — |
| 15 | Urethane Cone, Stabilizer | 2 | — |
| 16 | ERR, 35, 2.4, ZP, SHR-137 | 1 | — |
| 17 | TW, 1-inch x 5/8-inch x 1/16-inch | 2 | — |
Anti-rotation bracket kit:
| Item | Description | Quantity | Part Number |
| S | Kit - Anti-Rotation, Bracket | 1 | 2205448 |
| 1 | Main Plate, Universal Anti-Rotation | 1 | — |
| 2 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 2 | — |
| 3 | W, 25 x 11 x 2, 8, ZP, USS | 4 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN69261 | 2 | — |
| 5 | Retainer, Anti-Rotation | 1 | — |
Anti-rotation short bolt kit:
| Item | Description | Quantity | Part Number |
| T | Kit-Hardware, Anti-Rotation, Short | 1 | 2205449 |
| 1 | HCS, M10-1.5 x 60, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 2 | — |
| 3 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 4 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
Anti-rotation long bolt kit:
| Item | Description | Quantity | Part Number |
| U | Kit-Hardware, Anti-Rotation, Long | 1 | 2205450 |
| 1 | HCS, M10-1.5 x 80, 10.9, ZP, DIN931 | 1 | — |
| 2 | Rod End Spacer | 1 | — |
| 3 | Spacer Anti-Rotation | 1 | — |
| 4 | W, 7/16 x 1.0 x 0.072, 8, ZP, USS | 1 | — |
| 5 | FNN, M10-1.5, 8, ZP, DIN6926 | 1 | — |
Decals kit:
| Item | Description | Quantity | Part Number |
| V | Kit-Decals, Camoplast®, UTV | 1 | 2205453 |
| 1 | Sticker-Alignment | 1 | — |
| 2 | Sticker-Warning | 1 | — |
| 3 | Hub Cap Polaris Assembly | 1 | — |
| 4 | Sticker - Polaris UTV | 1 | — |
Caps kit:
| Item | Description | Quantity | Part Number |
| W | Kit-Caps | 1 | 2205120 |
| 1 | 2 Lips Cap, 1-3/4-inch OD Tube | 1 | — |
| 2 | 2 Lips Cap, 2-inch OD Tube | 1 | — |
| 3 | Wheel Cap | 12 | — |
| 4 | Dust Cap, Stabilizer | 1 | — |
| 5 | Hub Cap Polaris Assembly | 1 | — |
Front track:
| Item | Description | Quantity | Part Number |
| X | Track - Camoplast®, Front, UTV | 1 | 5414846 |
Rear track:
| Item | Description | Quantity | Part Number |
| Y | Track - Camoplast® | 1 | 5414848 |
Cone bushing kit:
| Item | Description | Quantity | Part Number |
| Z | Kit-Cone Bushing, Camoplast®, UTV | 1 | 2205462 |
| AA | ERR, 35, 2.4, ZP, SHR-137 | 1 | 2205454 |
Camoplast® is a registered trademark of Camoplast Solideal Inc.
